The boiler is the key part of our everyday life. But it is quite expensive, especially when it comes to energy costs. Nowadays, energy efficiency is considered as the inevitable factor for modern homeownership. The rising costs of energy and emerging emphasis on sustainability make it really daunting to alleviate energy consumption.

However, in many ways or others boilers contribute to the energy efficiency of the home. Therefore it is imperative to understand how they contribute and what you can do to ensure its efficiency saving energy and time.

Often people think of regular servicing and new boiler installation in Wakefield. But keeping these two solutions aside, you can incorporate a number of methods to sustain the efficacy of your home’s heating system in the long run.

Are you curious to know about those hacks? Then reading this blog is going to be very intriguing for you!

What are the simple hacks for maintaining boiler efficiency?

Here we have mentioned some simple and quick hacks to keep up with boiler efficiency. These are perfect to incorporate with your annual maintenance and plumbing needs.

Opt for an annual boiler service

There is nothing could be better than annual boiler servicing and maintenance carried out by a Gas Safe engineers. So, it will always be at the top of our list. It can pose a maximum impact on the efficacy of the heating system. During the inspection, the engineers will extensively check the health of controls, pumps, flue venting, heat exchanger, burners and other parts to troubleshoot both major and minor issues in their initial stage. This comprehensive test includes identification of soot accumulation, combustion efficiency and declined condition of heat exchanger to address them on an early note. They will carry an extensive checking for venting, supply lines and expansion tanks to ensure that the condition of the boiler is optimal. However, if you need help of an emergency plumber in Wakefield for sudden breakdown of boiler in the middle of night or at odd times, we are just a call away.

Upgrade to thermostatic radiator valves

When the radiator lacks from thermostatic valves, you need to adjust the temperature one room at a time. In such scenarios, you have to prioritise between the rooms to keep one of them warm, inviting and cosy while keep the others cool and unused. It will give prevention against overheating and save tons of energy in the long run. Smart or programmable TRVs enable custom heating schedules. All you need to do is to ensure that the valves have been installed in correct manner without any obstruction.

It offers heating precision along with time. Instead of heating the whole house on a uniform manner it will just warm up the room according to your need. TRVs are useful to save energy being wasted on overheating the room not in use. You can also have custom weekly or daily heating as per your routine. For instance, you can control or minimise the temperature on weekdays and have a warm and cosy room on weekends without wasting much energy; thus saving on utility bills too.

Insulate cylinder and pipes

Insulation of exposed pipes and hot water cylinder will alleviate standby heat loss. It will be applicable for the pipes in unheated areas such as attic too. Plus, installing simple foam pipe insulation during heating system installation by a boiler engineer in Wakefield is quite affordable ensuring significant drop in energy waste.

When the heat escapes or emits naturally from the pipes and hot cylinder even when the system is not in use will cause spike in energy bills. Proper insulation is the correct way to restrict the heat transmission from the cylinders and pipes. As a result, the hot water stored in the cylinder will stay warm and hot for a long period of time cutting the need to reheat again whenever needed. Insulation is imperative to carry out in accessible straight pipe sections, valves and cylinders in unheated spaces including garages and attics too as most transmission of heat takes place from these areas.

Bleed the radiator and refill system

You need to correct the pressure from time-to-time by bleeding trapped air from the pockets of radiator followed by refilling the system. It will ensure proper circulation and efficiency of the heating system as air blocks will restrict the flow causing cold spots and components will strain from low pressure. You need to top up the radiator when it goes below 1 in the boiler gauge.

Or else the water will seep into the system depositing in the radiators and blocking the circulation of water. Hence, it can be compensated by overheating to meet the hot water demand of the property. You can bleed the water out from the radiator by using a specific key and promote smooth circulation.

Read About: Why Do You Need 24/7 Reliable Gas Boiler Repair Services in Wakefield

How much does boiler engineers in Wakefield cost?

Several aspects are there to determine the cost of boiler engineers in Wakefield. It includes qualifications and experience of the person, location, hourly rates, seasons and others. Also, your property type, size and location of the boiler installation contribute to the total hiring expense.

Moreover, if you opt for a complete replacement or want a new installation with some additional work it may incur extra charges. On an average, the cost starts from £300 for a simple boiler installation. You can consult with a few companies and seek quotes from them before choosing anyone.

With us you can expect to have the most professional and accurate boiler installation for your property at a competitive cost. Send a quote request now.

Read About: Boiler Installation in Wakefield: Factors to Consider and Important Tips

Want help with boiler installation in Wakefield? We are here!

If you are in desperate need of a professional for boiler installation in Wakefield, we are right here at your service. The experienced team of boiler installers and engineers at AS Plumbing can carry out the job effectively with minimal disruption. We are open 7 days a week along with emergency services according to your convenience.

Whether its middle of night or early in the morning, we will arrive at your doorstep in no time for fixing your boiler issues without any additional expenses. Want to know more about our services, get in touch!

Pro Tips: Boiler Installation in Wakefield: Factors to Consider and Important Tips

FAQs

How often do I need to service my boiler for maximum efficiency?

According to our boiler experts, you need to go for annual boiler maintenance by a qualified and Gas Safe engineer in Wakefield. It will keep up with the components and maximise efficiency. Annual thorough inspection will ensure proper functioning of the boiler and its every part.

Can boiler upgrade increase the efficiency?

Boiler efficiency can be improved substantially with upgraded heating controls, thermostatic radiator valves, circulating pumps and changing heat exchangers to new and more advanced models.

How do I cut off energy usage of my boiler?

You can lower down the energy usage of the boiler system by upgrading controls, balancing radiators, adjusting water temperature, insulating pipes and scheduling custom heating times.

Which DIY maintenance is suitable for my boiler?

DIY maintenance can promote to ensure the boiler efficiency in the long run. It includes cleaning boiler services, topping up system pressure and bleeding radiators. However, calling for professional help is always inevitable!